Writions is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Learn more
Had you just invested in a new grease gun? Unfortunately, it might not be as easy to use as anticipated.
Ever had that moment when the newest tool or gadget did not live up to your expectations, despite all of the hype and promises from its manufacturer?
The latest high-tech models seem cool at first glance but then quickly become cumbersome due to their errors with precision, power supply issues, fragile design elements, and so on.
Addresses these problems by going for an older model, which has been proven more reliable than newer ones. Consider investing in something tried-and-tested rather than flashy yet unreliable.
Why Does Your Grease Gun Not Work Properly?
There could be several reasons behind your mini grease gun not working properly. Let’s find them!
- The Grease Pump
If your grease gun is not working, the issue may be that the pump has stopped.
This could happen if you do not remove all of the air from it before storing it or several other reasons.
This includes dirt and grit in between moving parts, rust on metal components, and damage to tubes.
If your grease gun is not pumping out any greasy goodness, then there are many possible causes, including dirt getting into areas where it should not go like inside pumps.
This can lead to them seizing up to stop functioning properly or corrosion caused by exposure to moisture.
Such as rainwater sitting near an open window with cold weather outside. These things will eventually cause problems even if everything was happening when you first bought your tool.
- Gun Spring
You might need to grease your gun. It’s always important and can save you from a lot of trouble in the future.
The reason behind why your grease gun may not be working is because there could be dirt or other particles lodged inside, which will hinder it from functioning properly.
Regular maintenance also helps ensure that this does not happen. So give some extra love for your tool by cleaning it out now and then!
- Piston Rod
One reason your grease gun may not be working is that the piston rod becomes defective.
Did you know that a piston rod can become so worn out after repeated use it needs to be replaced? If this has happened, put in an order for our replacement part and have the issue fixed right away.
- Stiff Plunger
Your grease gun may be going through a case of the stiff plunger, and that is why it is not pumping fluid.
The reason your otherwise dependable grease gun has stopped working might be because its pump is not functioning properly due to an increasingly common problem:
The stiffness in the plunger!
- Air Trapping
Grease is a sticky substance that does not mix well with air. If the gun barrel becomes clogged, it can stop grease from flowing through and coming out of the nozzle.
A common cause for this is when you are using old-fashioned pumps or hand-powered guns to dispense your cooking oils into pans instead of electric-powered dispensers.
Which seal off any openings to prevent material seeping back up towards them while providing consistent pressure on fluids being pumped at all levels within their containers like reliable Eureka Grease Gun Kit.
How Can You Prime Your Grease Gun?
Follow the instructions and guidelines to know the easy process of solving grease gun problems.
Step 1: unscrewing the grease gun from its cradle, you quickly get to work lubricating your most-used tools.
Step 2: Extend the follower rod out past both ears so that they rest beside each other to lengthen length while locking off against an object like furniture near you without stretching too much between sides which could cause discomfort during sessions.
Step 3: You can not make a greasy dish without grease. Remove the top cover carefully to avoid spilling any of this life-saver.
Step 4: Insert the greasy cartridge first
It is important to insert the open end of a grease cartridge into your drill before you screw it in. If not, your machine will not get any lubrication and will make drilling difficult.
Step 5: You may be wondering how you would open a cartridge. Take the metal tab on one end and use it to easily pry off the cover of your favorite flavor, discarding all other pieces that are in their way.
Step 6: Close the head of the grease gun onto its barrel firmly before screwing it.
Step 7: To remove and replace rods for different calibers, unscrew them before they’re needed
Step 8: Now it is time to start pumping the grease gun now
Step 9: It is important to grease your equipment before you head out onto the field. You should always start by locking down and securing the coupler, then work on greasing it up.
Once done with that, check for any leaks in points of connection and replace or tighten them as needed.
Dewalt Grease Gun Problems
So you own a Dewalt grease gun, and it has suddenly stopped working? This may not seem like the end of the world, but when your job requires that kind of tool to function efficiently, this can be extremely frustrating.
Let’s find out what is going on with these tools by exploring some common problems.
One problem people often report about their greasing guns, in general, is clogging up at times due to improper use or lubrication issues.
However, if you are experiencing something more unusual than simply running dry, there might be an issue worth investigating further.
How To Solve Dewalt Grease Gun Problems
You may have had problems with your Dewalt Grease Gun. If so, this article will help you solve them step by step.
- First and foremost, follow the manufacturer’s instructions when operating it because improper use can lead to injury or malfunctions of the gun in general.
- Make sure that there is grease inside before attempting to fill a cartridge as well.
- If not, then pressurize until one emerges from the nozzle opening at the top end.
- When loading cartridges into the carrier tube on the bottom of the pump mechanism around the cylinder head, be careful about how much pressure is exerted against the piston rod.
- While doing so, too heavy an exertion could break out internal seals and cause leakage, necessitating replacement parts for repair later down the line, not mentioning potential personal safety.
Frequently Asked Questions
Why is my grease gun not working?
It is a common misconception that the grease gun can only pump cooking oil into deep fryers.
While this may have been true in times past, modern-day greasing guns are designed with an adjustable nozzle for optimal performance when pumping any liquid or semi-solid food product.
The reason it might not work properly could stem from clogged tubes and couplers, poor quality fittings on tubing connections.
Or just general wear over time due to heavy use at high temperatures, such as what you find in commercial kitchens where hours go by each day without stopping. In other words, too many things are going wrong all at once.
How do you get the air out of a grease gun?
- First, make sure your gun is empty and that you have an airtight container nearby.
- Remove the nozzle from the barrel of a grease gun with one hand while holding it upside down to avoid any possible leaks.
- Next, insert several straws into each end of the barrel as far as they go without bending them outwards.
- This should be enough space for all air inside to escape through both ends at once when pressed downwards on top by another finger or spoon-shaped object such as a butter knife blade. If not readily available, then use whatever can act like one. Just do not forget about safety first.
How do you get the air out of a grease gun?
- One way to do this is by removing the plunger and placing it over a drain or sink.
- Next, press down on the trigger until all of the greases have been expelled from the gun before releasing pressure on both ends of plungers simultaneously.
- To remove air bubbles in your underarm deodorant sprayer, you should ensure no obstructions between the pump head and canister opening.
- Then release fluid onto the surface with runs into the container without leaving any wet spots behind.
How do you troubleshoot a grease gun?
If your grease gun is currently in use, but the pressure is not building up, try adding more oil to it.
If you are not sure how much of a quart or liter to add and do not want any excess on hand, fill it right up with water before putting the correct amount of cooking oils inside.
This will ensure that there’s no need for additional measuring later!
We know that some people might have had trouble getting their grease guns to work. So if you are experiencing this, do not worry!
A few things could be causing the issue, and we can help troubleshoot them for you.
To get started, check out our guide on identifying what is wrong with your gun so you can find a solution quickly.
Let us know if any of these solutions were helpful or if there was something else going on with your gun in need of attention before it starts leaking all over again.
Hi, I’m James, the founder of Writions. I have vast experience in the tools field and guides you will find on my blog. I created this blog to helo tools geeks who are seeking professional info and help with their tools.