Writions is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Learn more
If you are a miter saw owner, the number one question in your mind is probably, “How do I change the blade on my miter saw?” It is a big responsibility knowing that your safety and well-being may depend on the quality of cut you produce.
That being said, there are many questions to ask yourself before changing out blades: How old is my blade? Do I need an aggressive or fine finish? What angle am I cutting at?
Writions will answer all these questions and more!
The first thing is to know the reasons for changing the blade of the miter saw. So let’s bring up some of them!
Why Do You Need to Change Your Miter Saw’s Blade?
If you use a miter saw to cut wood, the blade must be sharp for your cuts to be accurate and professional.
Dull blades create more dust when cutting through the material as well, which can lead to damage on both sides of a piece being finished off with this method.
Frequently changing out dull or damaged blades will not only save you time. But also keep your projects looking their best by avoiding any imperfections along the edge created from an improperly sharpened tool.
When you cut a lot of wood, the blade will get dull.
This can be dangerous to your fingers and make it hard for cuts because there is more resistance when cutting through materials that need less pressure on them.
Woodworkers may not think about changing their saw blades or even realize they should change them to maintain safety and quality. However, during each job, as well as extend the life of this sharp tool used often throughout one’s workday.
We all have the go-to tools that we use for daily tasks. We turn to them with ease and without a second thought because they make us look good, or get the job done quickly so we can move on to something else.
The Miter Saw Blade Is Dull – But How To Know?
Dull blades are never a good thing, but it is not always the case that your blade is dull.
When cutting wood with a miter saw, little pieces of material accumulate on the cutting surface and make things even more difficult.
Sometimes you think your blade might be too sharp or just looking dirty. In reality, all they need is some love from an oilcloth to get them back up to shape.
Cleanliness is important when you’re working with power tools because dirty blades do not work and allow for corrosion which could destroy them in time.
Cleaners made especially for this purpose will remove these buildups while helping maintain your tool’s quality over long periods without needing replacement, saving money!
Dull blades can be difficult to clean because the food residue is stuck deep into them.
A good way of knowing if your blade needs replacing is when it starts taking longer for meat and vegetables to cook.
Or you notice that they are coming out undercooked instead of well-done as usual.
How To Change The Blade Of The Miter Saw?
Miter saw blades are designed to have a sharp edge on the teeth of each blade. When they get dull, your miter saw will not be able to cut as cleanly and efficiently. Luckily for you, changing them is actually quite easy!.
Let’s follow the guide!
- Remove The Spindle Cover
Remember to disconnect the miter saw before you get started from any power source. To do this, remove the spindle cover and set it aside somewhere safe.
Do not forget about it!
We are ready to go on our journey down the rabbit hole of safety checks for using a miter saw. Let’s start by first removing excess material to avoid getting caught up in anything during the operation.
Remove the rear screw and let it drop back to its original position.
- Hold The Spindle
To tighten the spindle pin, place your hands on both ends of this object. Make sure to hold it tightly before trying to turn anything else.
Because if you do not, then there is a chance that things could get really messy, and we all know how much time goes into cleaning up after such an event.
Hold one end with either hand while using the other hand for turning purposes. Again, use some muscle power and make sure not to go crazy.
Or otherwise bad stuff can happen which would be terrible in any sense so please do take care when doing these kinds of tasks.
- Take Out the Outer Washer Of The Blade
The first step is to insert the wrench into a clockwise position on the blade.
Next, remove that bolt with your hands and use it as leverage so you can take off one of those washers-you guessed right.
The outer one! Leave the inner layer there because we’re not going for anything too complicated here.
- Replace The Blade
The circular motion of the knife blade parts is always a good way to clean up any oil that has come in contact with your blades.
Simply wipe down both outer and inner washers after you have replaced them with their new counterpart. Careful not to damage or bend the edges, as this will only turn things worse.
Make sure the bolts are attached securely before you proceed. Tighten them by using a wrench in an anti-clockwise motion to make them more secure.
- Check If The Blade is Attached Perfectly
Be sure to maintain a firm grip on the blade. It would be best if you made it your number one priority not to let go of the handle at any point during this process, as there is always a chance that you could get hurt and then have no way out.
The blade guard is the last thing you should attach to your miter saw before using it. If not, there is a chance that any part of an unprotected user might get caught on the spinning wheel and end up mangled or worse.
To reattach this device correctly, unscrew it first with your screwdriver from its tight-fitting position over where the wood meets for cutting.
Note: “You might have to tighten the blade bolt cover again after giving it a break, but don’t forget that you need your wrench handy for disengaging the spindle pin lock before turning on the saw.”
How Can You Choose A Handy Miter Saw Blade?
Miter saws are a staple in carpentry and home improvement projects. They provide homeowners with the ability to make straight or angled cuts into wood, molding pieces for homes, and more.
The blades on these tools can be changed depending on what your project requires. This article will go over how you choose which blade is best suited for each job.
First off, it is important to know that there are two types of miter saw blades: miter cut (left) angles only up-and down cutting (right).
Keep in mind that left-handers should buy right-handed models because they are built, so one person operates them from their dominant side.
While other works opposite of them at an angle, meaning if both people were using
Let’s get started with understanding what makes up different types of Miter Saw Blades:
1) The tooth count
2) Blade thickness
3) Abrasive content
4) Number Of Teeth per inch
5) Hook angle
6) Tooth set
7) Rake angle
8) Bevel capacity
How To Change The Blade Of Dewalt Sliding Miter?
Follow the steps so that you can easily and safely change the blade;
Step 1: Nobody wants to be the person who cuts their finger with a power saw blade. Protect your fingers by disconnecting the power before changing out blades on your Dewalt Sliding Miter Saw.
Step 2: As Dewalt Sliding Miter Blade gets old, you will need to replace the blade. To get rid of this task for some time soon, all that needs to do is to raise the blade guard and replace the dull blades with a new one.
Step 3: A miter saw is a circular saw that has one blade in the center of it. The back or front spindle locket, which secures the blade to be used for cutting, must first be located before pressing on it.
Step 4: Take care to cut the wood carefully with your Dewalt miter saw. Ensure you keep your hands away from the blade, which can get dangerous if it touches any part of a person’s body.
Step 5: The blade’s teeth should face away from you, and be facing down on your saw. Be sure that when tightening screws, they are tight enough. So blades do not slip out while cutting wood or metal pieces for furniture building projects at home.
Once all these steps have been completed, make sure that no more oil is dripping onto your freshly cut surfaces with this handy DIY guide.
How To Change The Blade Of The Ryobi Miter Saw?
Follow the steps to change the Ryobi Miter Saw Blade;
Step 1: Unplugging the power cord from the miter saw may seem like a no-brainer, but what if you need to cut something vertically with it? You don’t want an accidental fire caused by electricity.
Step 2: When the power tool arm is locked in place, it cannot move up and down. Pressing on the lock releases this locking mechanism so that you can use your saw how you please.
Step 3: While the blade guard is lowered, you can find the tightening bolts and screws at either end of it. Loosen them with a flathead screwdriver or wrench before raising your blade guard to its maximum height.
Step 4: To remove the blade from a saw, start by pressing on to the spindle lock. This will secure it and prevent it from spinning while you take out an outer washer and avoid touching the inner one as much as possible.
When removing, be careful not to allow any oil residue onto your hands or clothes if some are left behind.
Step 5: With a new blade in place, make sure it’s facing downward on the spindle. Then, you will need to slide your outer washer and tighten its bolt until everything is secure.
After that comes flipping over the guard when you’re finished with all of this.
How To Change Hitachi Miter Saw Blade?
Follow the steps for the easy changing of the blade;
Step 1: To protect the machine from power surges, unplug it and store it in a safe place.
Step 2: With the blade guard removed, you can now see and adjust your blades. Loosen up the screw that mounts it to take out any slack. So you have more room for adjustments to make sure they are nice and tight before putting them back in place again.
Step 3: When you remove the blade, place a wooden block below it to keep it from spinning.
Step 4: To loosen the bolt and remove its flange, use a wrench to tighten one side of the nut. While loosening another with your hand until they are both completely undone. Then take off whatever is left by unscrewing from beneath.
Step 5: Carefully take out the blade and then, with one finger of your other hand on top to keep it steady, remove the piece of wood underneath.
Step 6: Start by grabbing the new blade with your left hand. Then, flip it around so that you can grip its handle in a way similar to when removing an old blade.
With your right hand, push on one side of the last tooth on the outer rim. While gently pulling at the opposite end until it clicks into place and disengages from holding onto the inner teeth. It would be best if you then used both hands for respective tasks.
Frequently Asked Questions
How do you change the blade on a Craftsman 12 inch compound miter saw?
The process of changing a blade on the Craftsman 12 inch compound miter saw is rather simple. First, you will need to release the tension by loosening and removing both wing nuts at either end of the arm where it attaches to its base.
Once this has been done, slide out one side of each clamping knob for them not to get caught. While sliding off your current blade and onto another one if desired or necessary as well.
Be sure, they are lined up with their respective tracks before proceeding. Next, align your new piece overtop so that there is sufficient overlap (about 1/2″) between any protruding bolts from beneath an aluminum plate on top.
Where is the spindle lock on a miter saw?
The spindle lock on a miter saw is usually located at the rear of the blade. It is either just after or before where you would attach your clamps to hold down a workpiece. Depending on what type and make of saw it is.
How do you change the blade on a 12 inch Dewalt miter saw?
- First, find where your screws are located that hold in place any safety devices like guards or blades before attempting anything else.
- Next, unscrew these with a Phillips screwdriver while making sure not to damage them to be put back properly later.
- Remove all of the parts and their corresponding hardware bits, then carefully set aside everything until there is nothing left but just what looks like a bare metal base plate now. You are getting close!
- Now use some long object
Are miter saw blades reverse threaded?
The idea that the threading on a Miter Saw blade is reversely threaded has been around for years. In reality, this is not true. There are no such things as “reverse” threads because they do not exist in nature.
When should I change my miter saw blade?
It would help if you changed your miter saw blade when it starts to dull and show signs of wear. Dull blades can cause excessive tear-out on the wood, which may make cleanup difficult in some cases.
How do you change the blade on a delta compound miter saw?
The blade on a Delta compound miter saw is one of the most important parts. It comprises three pieces, each fitting into different slots to cut planks and boards at any angle desired by carpenters.
If you notice that your cuts are not as accurate or straight as they used to be after using them for some time, this can mean only two things.
Either someone has tampered with it while performing their own DIY project outback and swapped blades without bothering to check whether theirs was compatible first. Or else there is something wrong with how you are handling the tool itself when cutting through a board.
To change what could turn out to be an expensive part if damaged prematurely, make sure all.
How do you change the blade on a Craftsman 10-inch compound miter saw?
A 10-inch compound miter saw can be difficult to handle. Fortunately, changing the blade is not too bad of a task if you are patient and use common sense while doing it.
First, unscrew the nut on top that holds your current blade in place by turning counterclockwise with an adjustable wrench or pliers until it comes loose enough for removal.
Then remove the screw holding down one side of your old blade before sliding out from under either end carefully so as not to cut yourself because these things have teeth.
After replacing both screws, make sure everything lines up correctly and secure them back into their respective holes using an Allen key, then tighten them firmly using more pressure than usual when tightening bolts/sc.
It can be a little tricky to change the blade on your miter saw, but it’s not as hard as you might think. First, we discussed what tools are needed and how to safely do this task without hurting yourself or damaging expensive blades.
If you have any questions about changing the blade on your miter saw, please feel free to leave them in the comments section below.